안내사항 |
현재 홈페이지에 등록된 제품들은 재고 유무와 관계없이 구입이 가능하며, 별도문의의 상품인 경우 반드시 유선상 확인 후 구매부탁드립니다.
납기가 표기된 상품의 경우 일반적인 수입진행에 소요되는 기간이며, 상품에 따라 납기일정이 추가 될 수 있으니 참고부탁드립니다. |
FreeZone 18 Liter -50C Console Freeze Dryers
FreeZone® 6, 12 & 18 Liter Console Freeze Dryers
Application suitability:
· Moderate to large sample loads or numerous sample batches
· Compatible with the FreeZone Stoppering Tray Dryer or
Bulk Tray Dryer (tray dryer sold separately)
All models feature:
| · |
Upright stainless steel collector coil capable of holding 6, 12
or 18 liters of ice before defrosting. Collector lid, 3/4" thick,
has neoprene gasket |
| · |
Full color, 5" capacitive touch screen with Lyo-Works OS:
- Real time display of collector temperature, vacuum level
and optional End-Zone end point detection
- Automatic and manual start-up modes for collector cool down
and vacuum pull down
- Vacuum set point, alerts, diagnostic tests, user manual,
defrost control and optional drying accessory control
- Data logging stores and displays data in table or graph format,
and may be exported via USB
- Settings include language (English, Spanish, French,
German, or Italian), time, temperature (° C or ° F) and vacuum
(mBar, Torr or Pa)
- Alerts can be emailed to user-entered addresses via
Ethernet connection
- Maintenance alert settings for vacuum pump and refrigeration
- Security lock-out |
| + |
USB port and Ethernet connection |
| · |
End-Zone compatible (End-Zone Starter Kit sold separately.
See page 48) |
| · |
Vacuum control valve |
| + |
Vacuum break valve |
| + |
Patented* moisture sensor |
| · |
Console cabinet with interior space for vacuum pump
(sold separately) and two-piece, removable front panel with
viewing window |
| · |
Stainless steel and powder-coated steel exterior |
| · |
Vuick-disconnect drain hose fitting with hose connector.
18", 1/4" ID silicone tubing and clamp included |
| · |
Clear acrylic chamber lid, 3/4" thick, with neoprene gasket |
| · |
Stainless steel and powder-coated steel exterior |
| · |
Clear acrylic lid with 3" dia. port for connection of drying
accessories (drying accessory sold separately) |
| · |
Interior electrical receptacle for vacuum pump connection |
| · |
3/4" OD vacuum connection, 36" of 3/4" ID vacuum hose
and two clamps |
Models conform to the following standards:
· UL Standard 61010-1 (115/230V, 60 Hz models)
· CAN/CSA C22.2 No. 61010-1 (115/230V, 60 Hz models)
· CE Conformity marking (230V, 50 Hz models)
Options include:
| · |
Single 3/4 hp, 1 hp or 1-1/2 hp HCFC/CFC-free refrigeration
system to cool collector to -50° C (-58° F) or two 1/3 hp or
3/4 hp HCFC/CFC-free refrigeration systems to cool collector
to -84° C (-119° F). Collectors reaching -50° C include acrylic lid.
Collectors reaching -84° C include stainless steel lid |
| · |
Purge valve |
| · |
PTFE-coated collector coil and chamber for corrosive compounds |
| · |
Built-in shell freezer with stainless steel bath, 5.5" w x 12.5" d x
7.5" h (30.5 x 14.0 x 19.0 cm), that includes 1/2 hp HCFC/CFC-free refrigeration system to cool heat transfer solution to
-40° C (-40° F), 3/4" thick high-density polyethylene lid, neoprene
gasket and quick-disconnect drain hose fitting and 18", 1/4" ID
silicone tubing with clamp |
| · |
Built-in stainless steel mini vacuum drying chamber, 5.1" w x
13.0" d x 2.5" h (12.9 x 33.0 x 6.4 cm), that includes 50-watt heater
with microprocessor control to +60° C (+140° F), 3/4" thick clear
acrylic lid and neoprene gasket. (Chamber is not cooled.) |
| · |
Region-specific electrical plug configurations |
All models require (not included):
· Vacuum pump with a displacement of at least 98 L/min,
0.002 mBar ultimate pressure and fitting for 3/4" ID vacuum
hose. See pages 41-44
· Drying accessory with 7 digit catalog number.
See pages 36-39
· Freeze dry glassware if not bulk freeze drying.
See pages 46, 50
Electrical Requirements
| Collector
Capacity |
Refrigeration
Temperature |
Volts |
Amps |
18 L |
-50° C |
230 |
9* |
Actual Dimensions & Shipping Weights
| Refrigeration Temperature |
Overall Dimensions ( w x d x h) |
Shipping Weight |
-50° C ( -58° F ) |
31.8" x 29.6" x 36.6" (80.8 x 75.2 x 93.0 cm) |
315 lbs. (143 kg) |
Catalog Number Configurator:
Use this key to configure the nine digit catalog number to order
your FreeZone 18 Liter Console Freeze Dryer with Stoppering Tray
Dryer capable of removing 10 liters of water in 24 hours.**
Select the COLLECTOR COIL and CHAMBER
MATERIAL of your freeze dryer. This is the sixth digit
of your catalog number.
1 = Stainless steel
2 = PTFE-coated stainless steel
Select the BUILT-IN OPTION of your freeze dryer.
This is the seventh digit of your catalog number.
0 = None
1 = Purge Valve
2 = Purge Valve and Mini Chamber. Add 15 lbs. (7 kg)to shipping weight shown below.
Select the ELECTRICAL CONFIGURATION and
PLUG TYPE of your freeze dryer. These are the eighth
and ninth digits of your catalog number.
10 = 230V, 60 Hz, with plug for North America
15 = 230V, 60 Hz, with plug for Saudi Arabia
30 = 230V, 50 Hz, with Schuko plug
40 = 230V, 50 Hz, with plug for China/Australia
50 = 230V, 50 Hz, with plug for Great Britain (UK)
70 = 230V, 50 Hz, with plug for India |
