안내사항 |
현재 홈페이지에 등록된 제품들은 재고 유무와 관계없이 구입이 가능하며, 별도문의의 상품인 경우 반드시 유선상 확인 후 구매부탁드립니다.
납기가 표기된 상품의 경우 일반적인 수입진행에 소요되는 기간이며, 상품에 따라 납기일정이 추가 될 수 있으니 참고부탁드립니다. |
K30 Gastight Syringe
Description
Borosilicate gastight syringe is an accurate part for the industrial syringe pump to dispense fluids in the highest precision requirement, all the wetted materials are made of Teflon relative materials to be able to transfer almost all the chemicals and solvents, designed with 1/4-28UNF male thread to connect with standard fittings, if you need female thread, runze female thread adapters can be used with our gastight syringe.
Wide temperature resistance and long service life make it very popular for the microfluidic engineering team.
· Standard 1/4-28UNF thread, good tightness
· Wetted Material: Borosilicate(glass), PTFE(piston/syringe outlet) , high precision, corrosion resistance
· Maximum pressure rating 0.68Mpa(Bar)
· Easy clean and sterilization, reusable
· Service Life: 3 million times no leakage (water)
· Flexible connections to meet different application
Model Numbers of Gastight Syringe
Specification
| Model No. |
Volume |
Channel |
Thread |
Stroke |
| RZ-K30-5ML-W-1-U |
5ML |
1 |
Male |
30mm |
| RZ-K30-2.5ML-W-1-U |
2.5ML |
1 |
Male |
30mm |
| RZ-K30-1.25ML-W-1-U |
1.25ML |
1 |
Male |
30mm |
| RZ-K30-500μL-W-1-U |
500μL |
1 |
Male |
30mm |
| RZ-K30-250μL-W-1-U |
250μL |
1 |
Male |
30mm |
| RZ-K30-125μL-W-1-U |
125μL |
1 |
Male |
30mm |
| RZ-K30-50μL-W-1-U |
50μL |
1 |
Male |
30mm |
| RZ-K30-25μL-W-1-U |
25μL |
1 |
Male |
30mm |
Dimension (Unit: mm)
TIPS:
DO NOT IMMERSE THE SYRINGE IN THE SOLVENT THE GULED PARTS (NOTE 1) CAN BE SOLVED
Attention: If you change the syringe, you should also change the washer for a good seal. Washers are available from Runze.
KNOWN TO BE POORLY TOLERATED BY LIQUIDS SUCH AS: CONCENTRATED NITRIC ACID, AQUA REGIA (INCLUDING BUT NOT LIMITED TO)
PROHIBITED USED LIQUIDS: HYDROFLUORIC ACID (INCLUDING BUT NOT LIMITED TO
