안내사항 |
현재 홈페이지에 등록된 제품들은 재고 유무와 관계없이 구입이 가능하며, 별도문의의 상품인 경우 반드시 유선상 확인 후 구매부탁드립니다.
납기가 표기된 상품의 경우 일반적인 수입진행에 소요되는 기간이며, 상품에 따라 납기일정이 추가 될 수 있으니 참고부탁드립니다. |
L/S® Precision Variable-Speed Modular Drives
Place where convenient—ideal for limited spaces, hoods, or isolation chambers
Description
· Three-digit LED display shows motor rpm—confirm speed setting at a glance
· Remote control capabilities: speed, direction, and start/stop
· ±0.25% speed control for precise flow regulation—ideal for metering applications
A. Modular Drives with Benchtop Controller
· Splash-resistant ABS plastic controller housing is IP33 rated; drive housing is epoxy finished steel, IP33 rated
· Remote control capabilities via a DB9 female connector on back of controller
B. Washdown Modular Drives with Wall-Mount Controller
· Wall-mount controller housing is powder-coated aluminum, IP66 / NEMA 4X rated for washdown; powder-coated steel drive housing is IP66 / NEMA 4X rated for washdown
· Remote control capabilities via weather-resistant connection on controller
rpm |
Speed control (resolution) |
Pump heads
accepted |
Motor size |
IP rating |
Dimensions (L x W x H) |
Power (50/60 Hz) |
Catalog number |
VAC |
Amps |
A. Precision modular drives with benchtop controller |
6 to 600 |
±0.25%
(1 rpm at 600 rpm; 0.1 rpm at 100 rpm) |
2 |
1⁄10 hp (75 W) |
IP33 |
Controller:
10 1⁄2" x 8 1⁄4" x 5" Drive:
10 3⁄4" x 4 3⁄8" x 4 1⁄2" |
90 to 260 |
2.2 at 115 VAC, 1.1 at 230 VAC |
GY-07557-00 |
1 to 100 |
4 |
GY-07557-10 |
B. Precision washdown modular drives with washdown wall-mount controller |
6 to 600 |
±0.25%
(1 rpm at 600 rpm; 0.1 rpm at 100 rpm |
2 |
1⁄10 hp (75 W) |
IP66 |
Controller:
9" x 11 3⁄4" x 4 1⁄2" Drive:
15 9⁄16" x 7" x 6" |
90 to 260 |
2.2 at 115 VAC, 1.1 at 230 VAC |
GY-07557-60 |
1 to 100 |
4 |
GY-07557-70 |
GY-07557-51 Extension cable, 9 ft (2.7 m); extend distance between motor and controller
GY-07595-47 Cable assembly, for benchtop modular drives; DB9 male connector and 25 ft (7.9 m) cable with stripped wire terminal ends. Use for remote control
GY-77300-32 Cable assembly, for washdown modular drives; 18-pin round connector and 25 ft (7.9 m) cable with stripped wireterminal ends. Use for remote control
GY-17050-01 NIST-traceable calibration with data for peristaltic pump drive