| · |
Upright stainless steel collector coil with clear acrylic lid
capable of removing 4 L of water in 24 hours and holding 6 L
of ice before defrosting* |
| · |
3/4 hp HCFC/CFC-free refrigeration system to cool collector to
-50° C (-58° F). For aqueous samples. Not for use with samples
containing acetonitrile, methanol or ethanol |
| + |
LCD displays system operating parameters, set-up parameters
and alarm messages. User configured to display vacuum in mBar,
Torr or Pa and temperature in ° C or ° F. Also displays total hours
of refrigeration system operation, time since refrigeration system
was serviced, total number of hours of vacuum pump operation
and time since the vacuum pump was serviced (in hours) |
| · |
LED vacuum and temperature “waves” for display of relative
system vacuum and collector temperature |
| · |
Automatic start-up switch for collector cool-down and vacuum
pull-down with manual override switches |
| + |
Alarm flashes and beeps to indicate an abnormal system event
has occurred, including: power failure, improper line voltage supply, collector temperature above -40° C, service vacuum
pump (after 1000 hours of vacuum use) and moisture in collector.
Pressing the Menu Switch displays the alarm message on the LCD |
| · |
RS-232 port to transmit data to a user-supplied computer.
Transmission intervals may be user-configured for 10, 30, 60,
300 or 600 seconds |
| + |
Patented** moisture sensor |
| + |
Vacuum control valve |
| · |
Stainless steel and powder-coated steel exterior |
| · |
Retractable 9" collector drain hose |
| · |
3/4" OD vacuum connection, three feet of 3/4" ID vacuum
hose and two clamps |
| · |
Electrical receptacle for vacuum pump connection |
| · |
3" dia. port for connection of drying accessories
(drying accessory sold separately) |
| · |
Overall dimensions: 31.8" w x 28.1" d x 14.5" h
(80.8 x 71.4 x 36.8 cm)
|
