안내사항 |
현재 홈페이지에 등록된 제품들은 재고 유무와 관계없이 구입이 가능하며, 별도문의의 상품인 경우 반드시 유선상 확인 후 구매부탁드립니다.
납기가 표기된 상품의 경우 일반적인 수입진행에 소요되는 기간이며, 상품에 따라 납기일정이 추가 될 수 있으니 참고부탁드립니다. |
|
KHL Peristaltic Pump
Peristaltic Pump Seriesr
Features
Suitable for viscous, non-viscous liquid transport
Compact structure
Delicate and charming,Cool colors
Stepper motor, Higher accuracy
Product Introduce
Motor Selection - The KHL Series Peristaltic Pump is a 57 stepper motor driver peristaltic pump.
Tubing Selection - The pump tubing is optional to meet different Flow requirements with silicon tube.
Installation - Installation for the Þxed wear plate ( With reference to the drawings)
Drive mode - drive mode for the direct drive motor shaft, the motor rotates one revolution, the pump head
rotates one revolution either.
The main material - The cover is PC plastic ,the pump body is PA engineering plastics.
|
|
Parameters
| Code |
24# |
35# |
| ID*OD(mm) |
64*11.4 |
7.9*12.7 |
| Materials |
Silicon |
Silicon |
Flow rate
(ml/min) |
24V, 12V
Stepper motor
(SZ)
1.8A |
3 rollers |
1300ml
(350rpm) |
1800ml
(350rpm) |
Working conditions:
DC voltage 24 current 2A
Ambient temperature: 0 ~ 40℃
Relative humidity: ＜80℃ |
Note: The above ßow parameters at 20 degrees Celsius standard pressure without water pressure measured, the actual according to different
media, the outlet pressure is different, the DC motor speed error, the Flow there will be some error, the data for reference. Accuracy of different
individual ßow accuracy within 5%, a single repeat accuracy of less than 2%, the accuracy of the conservative data, the test tube size, liquid
viscosity, suction lift head varies, depending on the actual application.
| Dimensions |
|
Stepper motor wiring diagram
Step angle 1.8°, Two-phase four-wire, Current: 1.8A, Wiring length: 400mm
Terminal model: JXT XHP-4 (Pins:2.54 spacing)
