안내사항 |
현재 홈페이지에 등록된 제품들은 재고 유무와 관계없이 구입이 가능하며, 별도문의의 상품인 경우 반드시 유선상 확인 후 구매부탁드립니다.
납기가 표기된 상품의 경우 일반적인 수입진행에 소요되는 기간이며, 상품에 따라 납기일정이 추가 될 수 있으니 참고부탁드립니다. |
ITO COATED ON PET
ITO 코팅 PET (유리 두께 : 0.175mm), (저항력 : <15 ohms / sq)
Description
ITO-coated PET films find use in many different applications for bearing properties like high optical transmission and conductivity. They are also be used in liquid crystal devices to realign the liquid crystal cells. ITO PET films are also common components for products such as touchscreens, position sensors, electroluminescent lamps, electromagnetic shielding applications etc.
· Specified resistivity – (~15 ohms/sq), (~60 ohms/sq) & (~100 ohms/sq)
· Typical resistivity – (8-10 ohms/sq), (60-70 ohms/sq) & (90-110 ohms/sq)
· Transmittance at 550nm – ≥ 87%
· ITO film Thickness – (1400-1500 Å), (350-370 Å) & 720Å
· Heat resistance (R/R 0 ) – ≤1.3 (@130°C, 30min)
· Hear storage (R/R 0 ) – ≤1.3 (@90°C x 250hrs)
· High humidity storage (R/R 0 ) – ≤1.3 (@60°C x 250hrs, 95% RH)
· Heat cycle (R/R 0 ) – ≤1.3 (@-30°C~85°C x 50 cycle)
· Heat cycle (R/R 0 ) – ≤1.3 (@-30°C~85°C x 50 cycle)
· Surface check – Smooth, no holes, no patches and no stain
· Storage temperature – -30°C ~ +40°C
FULL DESCRIPTION
Though ITO on PET can’t be soldered, it can be connected with help of conductive inks, paints, copper tape with conductive adhesive etc. Supplied in industries like EMI shielding, telecommunication etc. The polyester film exhibits transmittance and resistance characteristics much like the glass substrates. We supply high-quality and flexible ITO PET film that can have different applications.
ITO coated PET films supplied by us promise excellent coating uniformity and adhesion; and made from optical grade polyester film. We also deliver ITO coatings on other film substrates, like heat stabilized film, anti-glare film, or clear hard coated polyester film; we also accept special ITO coating order with a surface resistance that is higher than that of standard ITO PET products. Offer special rates for bulk orders. Indium Tin Oxide (ITO) on clear plastic (PET), or ITO on PET, is prepared by vacuum coating an optically clear film with a fine layer of ITO. It is ideal for touch screen devices and flexible displays.
ITO on PET has vacuum blasted layer of Indium Tin Oxide on a clear sheet of the optical flexible sheet. Our unique coating technology gives our products high stability. ITO on PET products are applied in flexible displays, electroluminescent lighting (EL), touch-screens and any other application where flexible clear sheets are needed.
PHYSICAL PROPERTIES
· Configuration – Polyethylene terephthalate (PET) / ITO
· Substrate – Optical clear grade PET film / Hardcoated PET film
· Passivation layer – No
· ITO coating method – Magnetron sputtering at elevated temperature under vacuum
· ITO work function – 4.8~4.9eV (measured by UPS) after proper cleaning
· Surface Roughness – RMS1~10 nm, depend on various product
Specifications
|
ITO COATED ON PET ( Glass Thickness : 0.175mm ), ( Resistivity : < 15 ohms/sq ) |
| Product Code |
Description |
Length x Width |
Thickness (mm) |
Surface Resistivity |
Transmittance ( % ) |
| TIPE001 |
Indium Tin Oxide coated PET |
100mm × 100mm |
0.175mm |
<15 ohms/sq |
>75% |
| TIPE002 |
Indium Tin Oxide coated PET |
200mm × 100mm |
0.175mm |
<15 ohms/sq |
>75% |
| TIPE003 |
Indium Tin Oxide coated PET |
16 inches × 16 inches |
0.175mm |
<15 ohms/sq |
>75% |
