안내사항 |
현재 홈페이지에 등록된 제품들은 재고 유무와 관계없이 구입이 가능하며, 별도문의의 상품인 경우 반드시 유선상 확인 후 구매부탁드립니다.
납기가 표기된 상품의 경우 일반적인 수입진행에 소요되는 기간이며, 상품에 따라 납기일정이 추가 될 수 있으니 참고부탁드립니다. |
AZO COATED GLASS
AZO 코팅 유리(유리 두께 : 3.2mm), (저항력 : < 10 ohms/sq )
Description
Al Doped ZnO coated glass, Al Doped Zinc Oxide coated glass. AZO (Aluminum Doped Zinc Oxide films have become technologically important because of their wide range of electrical and optical properties, besides its high chemical & mechanical stability.
· Sheet Resistance – 7.7 – 10.5 ohms/sq
· Transmittance @400-1000nm – 82-83%)
· Uniformity of Resistance – ≤ 10ohms/sq
· AZO Layer Thickness – 8000 – 8500 Å
· Haze – ≤ 10%
· Flatness – 0.05%
· Warpage – 0.06%
· Squareness – ≤ 3.2 mm
· Dimension tolerance – ± 0.1 mm
· Thickness – 3.2 mm
FULL DESCRIPTION
AZO (Aluminum Doped Zinc Oxide) is amongst the best and most preferred transparent conductive oxide materials owing to its superior optical and electrical properties as mentioned above. Use of AZO-coated glasses is on the rise as the transparent conductive substrate is used in applications like the thin-film solar cell, OLED, electrochromic glass etc. They are used in a wide range of applications like flat panel display electrodes and gas sensors etc.
Owing to their large piezoelectric constant, these films can be used as surface acoustic wave devices and solar cells. Their optical band gap (3.3 eV) is wide which enables transmission of most of the useful solar radiation.
Al Doped ZnO coated glasses supplied by us come with a surface resistance of 10ohm/sq., transmittance >=80%, having a polished surface with no pattern. They have high density, 95+%, they’re hot pressed and conductive.
Its rise in demand comes from the major advantage of cost saving. A major cost saving is possible with AZO materials as compared to ITO and other TCOs. It is possible to obtain the complete range of sheet resistance, from < 50 Ω/sq. to M Ω/sq. with AZO by changing deposition thickness and parameters. As substrate heat is not required, it makes AZO ideal for polymer and substrates that are sensitive to temperature. Patterning of films by etching is easier than when compared to ITO films.
We can customize the product for you. If you require ITO/AZO/FTO, please let us know of your requirements with specifications. Based on your requirement, PROPERTIES: we shall deliver the most suitable product for you. The picture of the product may be a little different, as per your requirement. We quote price according to size and requirements you may specify
Specifications
AZO COATED GLASS ( Glass Thickness : 3.2 mm ), ( Resistivity : < 10 ohms/sq ) |
Product Code |
Description |
Length x Width |
Thickness |
Surface Resistivity |
Transmittance |
AZO-001 |
AZO coated glass slides |
25mm × 25mm |
3.2mm |
<10 ohms/sq |
>80% |
AZO-002 |
AZO coated glass slides |
50mm × 25mm |
3.2mm |
<10 ohms/sq |
>80% |
AZO-003 |
AZO coated glass slides |
75mm × 25mm |
3.2mm |
<10 ohms/sq |
>80% |
AZO-004 |
AZO coated glass slides |
50mm × 50mm |
3.2mm |
<10 ohms/sq |
>80% |
AZO-005 |
AZO coated glass slides |
100mm × 100mm |
3.2mm |
<10 ohms/sq |
>80% |