안내사항 |
현재 홈페이지에 등록된 제품들은 재고 유무와 관계없이 구입이 가능하며, 별도문의의 상품인 경우 반드시 유선상 확인 후 구매부탁드립니다.
납기가 표기된 상품의 경우 일반적인 수입진행에 소요되는 기간이며, 상품에 따라 납기일정이 추가 될 수 있으니 참고부탁드립니다. |
Sample Injectors
Description
The sample injector is a fast switching solenoid valve that worked by switching two positions back and forth and was configured with sample loops between two of the ports to create a specific volume column to meet final dispensing requirements, so the accuracy of tubing inner diameter is very important to ensure the accurate sample dispensing volume. Runze is a professional switching valve manufacturer and supplier,
we are able to offer various fluid control equipment.
If you want to know more, please contact us now!
Model Numbers of Sample Injectors
Flow Configuration of Sample Injectors
Specification
|
Orifice |
1.2mm |
Wetted material |
PCTFE, Sapphire |
Port configuration |
6/8/10 port |
Port-to-Port volume |
27.5μL |
Dead volume |
5.4μL |
Air pressure |
0-1.0Mpa |
Water pressure |
0-1.6Mpa |
Origin detection |
Auto reset to initial position when powered on (optional and settable) |
Liquid temperature |
0-150℃ |
Connection |
1/4-28UNF |
Replaceable parts |
Stator replaceable, sealed rotor irreplaceable |
Transposition |
Random start to any specific port |
Driver |
Non-optional |
Valve drive |
≤500ms |
Max. torque |
3N/m |
Communication |
RS232, RS485, CAN |
Baud rate |
RS232/RS485: 9600bps, 9200dps, 38400dps, 57600dps, 115200dps
CAN: 100Kbps, 200Kbps, 500Kbps, 1Mbps |
Address & Parameter setup |
Communication interface |
Power supply |
DC24V/2.0A |
Max power |
36W |
Operating temperature |
-10℃ to +50℃ |
Operating humidity |
<80% relative humidity, non-condensing |
Dimension (L*W*H) |
60*51*145.8mm |
Net weight |
0.73KG |
Driver Port of Sample Injectors
Port |
Description |
+ |
DC24V positive |
- |
DC24V negative |
TX |
RS232 data input |
RX |
RS232 data output |
GND |
GND |
H |
CANH |
L |
CANL |
A |
RS485 A |
B |
RS485 B |
Dimension (Unit:mm)