안내사항 |
현재 홈페이지에 등록된 제품들은 재고 유무와 관계없이 구입이 가능하며, 별도문의의 상품인 경우 반드시 유선상 확인 후 구매부탁드립니다.
납기가 표기된 상품의 경우 일반적인 수입진행에 소요되는 기간이며, 상품에 따라 납기일정이 추가 될 수 있으니 참고부탁드립니다. |
L/S® Digital Modular Dispensing Drives
Three dispensing modes and precision low-maintenance motor
Description
· Graphical LCD shows four operating modes: continuous run, timed dispense, copy dispense, volume dispense
· Dispense by mL—volume in mL of each dispense, 0.001 to 9999 mL;Copy—1 to 9,999 dispense cycles; or SEC—time interval between each dispense cycle (1 to 9,999 secs)
· Antidrip function ensures dispense accuracy
· Brushless, maintenance-free motor offers ±0.1% speed control accuracy and a 6000 to 1 turndown ratio
· Remote control capabilities: speed, direction, start/stop/prime, and tach output
What’s included: 6-ft (1.8-m) cable to connect drive and controller and 6-ft (1.8-m) line cord with IEC 320/CEE22 socket. Shipped with countryspecific plug/cord set; please specify destination when ordering.
A. Modular Drive with Benchtop Controller
· Stackable, splash-resistant ABS plastic controller housing is IP33 rated; drive housing is epoxy finished steel, IP33 rated
· Remote control via a DB25 female connector on back of controller
B. Washdown Modular Drive with Wall-Mount Controller
· Wall-mount controller housing is powder-coated aluminum, IP66 / NEMA4X rated for washdown; powder-coated steel drive housing is IP66 / NEMA4X rated for washdown
· Remote control via weather-resistant connection on controller
|
rpm |
Speed
control |
Pump heads
accepted |
Motor
size |
IP
rating |
Dimensions
(L x W x H) |
Power (50/60 Hz) |
Catalog
number |
|
VAC |
Amps |
|
A. Digital modular drive with benchtop controller |
|
0.1 to
600 |
±0.1%
(0.1 rpm at 600 rpm;
0.01 rpm at 100 rpm) |
2 |
1⁄10 hp
(75 W) |
IP33 |
Controller:10 1⁄2" x 8 1⁄4" x 5"
(26.7 x 21 x 12.7 cm)
Drive:10 1⁄2" x 3 13⁄16" x 4 5⁄8"
(26.7 x 9.7 x 11.7 cm) |
90 to 260 |
2.2 at 115 VAC,
1.1 at 230 VAC |
GY-77301-40 |
|
B. Digital washdown modular drive with washdown, wall-mount controller |
|
0.1 to
600 |
±0.1%
(0.1 rpm at 600 rpm;
0.01 rpm at 100 rpm) |
2 |
1⁄10 hp
(75 W) |
IP66 |
Controller: 9" x 11 3⁄4" x 4 1⁄2"
(23 x 30 x 11.4 cm)
Drive:15 9⁄16" x 7" x 6"
(39.5 x 17.8 x 15.2 cm) |
90 to 260 |
2.2 at 115 VAC,
1.1 at 230 VAC |
GY-77301-50 |
GY-07523-95 Cable assembly, for benchtop modular drive 77301-40;DB25 male connector and 25-ft (7.9-m) cable with stripped wire ends for remote control
GY-77301-82 Extension cable, 9 ft (2.7 m) extends distance between motor and controller
GY-07575-80 Remote control cable for washdown modular drive 77301-50; wire to controller/PLC; 25-ft (8.3-m) length
GY-17050-01 NIST-traceable calibration for peristaltic pump drive
