본문 바로가기 주메뉴 바로가기

FreeZone® 4.5 Liter Benchtop Freeze Dryers ()

FreeZone® 4.5 Liter Benchtop Freeze Dryers

주요특징

  • Upright stainless steel collector coil capable of holding 4.5L of ice before defrosting. Acrylic collector lid, 3/4\" thick, has neoprene gasket and 3\" diameter port for connection of drying accessories (sold separately).
  • Compact benchtop design with a small footprint.
  • Brushed stainless steel and glacier white, powder-coated steel exterior with blue accents.
  • eal time display of collector temperature, vacuum level, and optional End-Zone™ end point detection system.
  • Start–up mode for collector cool-down and vacuum pull-down (automatic or manual).
  • Operating mode (standby or run).
  • Vacuum set point, alerts, diagnostic tests, user manual, defrost control, and optional drying accessory parameters.
  • Data logging stores and displays data in table or chart format, and may be exported via USB or Ethernet.
  • Settings include language (English, Spanish, French, German, or Italian), time, time zone, temperature (° C or ° F), and vacuum (mBar, Torr, or Pa).
  • Alerts are programmable to send via Ethernet connection to user-entered email addresses.
  • Display settings include brightness, touch sounds (on/off), and screen time out in minutes (on/off).
  • Maintenance alert settings include vacuum pump oil change, refrigeration cleaning, total operating hours and line voltage offset.
  • Level-specific security lock-out prevents changes to programs and other system parameters.

안내사항

   현재 홈페이지에 등록된 제품들은 재고 유무와 관계없이 구입이 가능하며, 별도문의의 상품인 경우 반드시 유선상 확인 후 구매부탁드립니다.
   납기가 표기된 상품의 경우 일반적인 수입진행에 소요되는 기간이며, 상품에 따라 납기일정이 추가 될 수 있으니 참고부탁드립니다.



FreeZone® 4.5 Liter Benchtop Freeze Dryers

 

 

Description


Application suitability:

· Light to moderate sample loads
· Limited floor space


All models feature:

· Upright stainless steel collector coil capable of holding 4.5 L of ice before defrosting. Collector lid, 3/4" thick, has neoprene gasket and 3" dia. port to connect drying accessories (sold separately)
+ Full color, 5" capacitive touch screen with Lyo-Works OS:
- Real time display of collector temperature, vacuum level and optional End-Zone end point detection
- Automatic and manual start-up modes for collector cool down and vacuum pull down
- Vacuum set point, alerts, diagnostic tests, user manual, defrost control and optional drying accessory control
- Data logging stores and displays data in table or graph format, and may be exported via USB
- Settings include language (English, Spanish, French, German, or Italian), time, temperature (° C or ° F) and vacuum (mBar, Torr or Pa)
- Alerts can be emailed to user-entered addresses via Ethernet connection
- Maintenance alert settings for vacuum pump and refrigeration
- Security lock out
+ USB port and Ethernet connection
· End-Zone compatible (End-Zone Starter Kit sold separately. See page 48)
· Hot gas defrost with auto shut off at +65° C (+149° F)
· Vacuum control valve
+ Vacuum break valve
+ Patented** moisture sensor
· Compact benchtop design with a small footprint
· Stainless steel and powder-coated steel exterior
· Quick-disconnect drain hose fitting with hose connector. 18", 1/4" ID silicone tubing and clamp included
· Electrical receptacle for vacuum pump connection
· 3/4" OD vacuum connection, 50" of 3/4" ID vacuum hose and two clamps


Models conform to the following standards:
· UL Standard 61010-1 (115/230V, 60 Hz models)
· CAN/CSA C22.2 No. 61010-1 (115/230V, 60 Hz models)
· CE Conformity marking (230V, 50 Hz models)


Options include:

·


   

Single 1/3 hp HCFC/CFC-free refrigeration system to cool collector to -50° C (-58° F), two 1/3 hp HCFC/CFC-free refrigeration systems to cool collector to -84° C (-119° F) or two 1/2 hp HCFC/CFC-free refrigeration systems to cool collector to -105° C (-157° F) at 60 Hz or -102° C (-152° F) at 50 Hz. Collectors reaching -50° C include acrylic lid. Collectors reaching -84° C or -105° C include stainless steel lid
· PTFE-coated collector coil and chamber for corrosive compounds
· Region-specific electrical plug configurations

 


All models require (not included):
· Vacuum pump with a displacement of at least 98 L/min, 0.002 mBar ultimate pressure and fitting for 3/4" ID vacuum hose. See pages 41-44
· Drying accessory with 7 digit catalog number. See pages 36-39
· Freeze dry glassware if not bulk freeze drying. See pages 46, 50



Electrical Requirements

Collector Capacity Refrigeration Temperature Volts Amps Note

4.5 L

-50° C

115

14*

Requires 20 amp dedicated circuit

4.5 L

-50° C

230

7†

 

4.5 L

-84° C & -105° C

115

16**

Requires 20 amp dedicated circuit

4.5 L

-84° C & -105° C

230

10†

 



Actual Dimensions & Shipping Weights

Refrigeration Temperature Overall Dimensions ( w x d x h) Shipping Weight

-50° C ( -58° F )

16.5" x 22.4" x 18.9" (41.9 x 56.9 x 48.0 cm)

139 lbs. (63 kg)

-84° C (-119° F)

22.5" x 26.5" x 18.5" (57.2 x 67.3 x 47.0 cm)

197 lbs. (89 kg)

-105° C (-157° F)

22.5" x 26.5" x 18.5" (57.2 x 67.3 x 47.0 cm)

205 lbs. (93 kg)

** Freeze drying rate will be lower for samples other than shell-frozen plain water. For optimum performance, room temperature should be 21° C (70° F) or colder.
** System amperage shown includes 8 amp maximum vacuum pump rating.
† System amperage shown includes 4.5 amp maximum vacuum pump rating.

 

 

Catalog Number Configurator:
Use this key to configure the nine digit catalog number to order your FreeZone 8 Liter -50° C Benchtop Freeze Dryer.

 

                

 

Select the REFRIGERATION TEMPERATURE of your freeze dryer’s collector.
This is the second digit of your catalog number.
0 = -50° C (-58° F). For samples containing water. Not for use with samples
containing acetonitrile, methanol or ethanol. Collector is capable of removing
2 liters of water in 24 hours.*
1 = -84° C (-119° F). For low eutectic point samples containing water or acetonitrile. Not for use with samples containing methanol or ethanol. Collector is capable of removing 4 liters of water in 24 hours.*
2 = -105° C (-157° F) at 60 Hz or -102° C (-152° F) at 50 Hz. For low eutectic point samples containing water, acetonitrile or dilute methanol or ethanol. Collector is
capable of removing 2.5 liters of water in 24 hours.*

Select the COLLECTOR COIL and CHAMBER MATERIAL of your freeze dryer. This is the sixth digit of your catalog number.
1 = Stainless steel
2 = PTFE-coated stainless steel


Select the ELECTRICAL CONFIGURATION and PLUG TYPE of your freeze dryer. These are the eighth and ninth digits of your catalog number.
00 = 115V, 60 Hz, with 20A plug for North America
10 = 230V, 60 Hz, with plug for North America
15 = 230V, 60 Hz, with plug for Saudi Arabia
30 = 230V, 50 Hz, with Schuko plug
40 = 230V, 50 Hz, with plug for China/Australia
50 = 230V, 50 Hz, with plug for Great Britain (UK)
70 = 230V, 50 Hz, with plug for India 

 


  • 배송 안내

    택배 배송을 기본으로 하며 고객님의 요청에 의해 화물로 배송이 가능합니다.
    고객님의 요청에 의한 긴급 배송(고속버스 화물, 퀵서비스 등)으로 인한 물류비용은 고객님의 부담입니다.
    제품 설치 및 교육이 필요한 경우는 Off-Line으로 본사 기술부와 미리 논의 하시고, 직납 일정등의 협의를 부탁드립니다.

  • 배송 기간

    재고가 있는 품목에 한하여 입금 확인 후 2일 이내에 발송 됩니다. (입금 확인은 당일 3시 마감되며, 3시 이후 입금 건은 익일 처리 됩니다.)
    택배의 경우 일반적으로 발송일로부터 3~7일, 도서/산간/오지 등 교통이 불편한 지역의 경우 4~8일(토.일, 공휴일 제외) 정도 소요됩니다.

    불가 항력의 사유(일시품절/제조사로부터의 제품 수급 문제/천재지변 등)로 배송이 지연 될 경우 고객님께 연락을 드리겠습니다.
    수입품목의 공급 및 재고 상태는 주문시점에 따라 달라질 수 있으며, 공급이 어려울 경우 주문접수 후 주문이 취소 될 수 있습니다.
    재고가 없는 상품의 경우 상품이 입고 된 이후 발송이 가능하므로, 안내 받으신 배송기간 보다 다소 연장될 수 있습니다.
    제품 준비 과정에 차질이 생겨 늦어질 경우에는 고객님께 연락을 드리겠습니다.
    주문하신 상품은 결제 확인 후 발송됩니다.
    결제 후 메일 [ scist@scist.co.kr ]이나 전화 [ 031-546-8799 ]으로 연락 주시면 더욱 빨리 처리 해 드리겠습니다.

  • 배송 지역

    전국 어느 지역이나 배송 가능합니다. (단, 지역에 따라서 배송기간에 다소 차이가 있을 수 있습니다.)

  • 배송 운임

    주문 금액 기준 (부가세 별도) 총액 10만원 이상 주문시에는 무료로 배송해 드립니다. (택배기준)
    단, 10만원 미만 주문 시 착불 발송되며, 요청에 따라 주문자 사전 결제로 선불 배송 가능합니다.
    택배 배송이 불가능한 상품(장비 류 등)이나, ‘운임비 별도’로 명시 된 상품, 고객요청에 의한 운동수단 이용 시 배송비는 주문자 부담으로 진행됨에 유의 해 주시기 바랍니다.

  • 배송 확인 방법

    마이페이지의 주문/배송조회 내역에서 확인 가능합니다.

  • 교환 및 반품 안내

    상품에 하자가 있거나 주문한 상품과 다를 경우, 수령일로부터 15일 이내인 경우에 한하여 1:1 상품교환 또는 전액 환불 조치 해드리며,
    이에 소요되는 모든 비용 또한 싸이스트(주)에서 부담합니다.
    제품에 하자는 없지만, 다른 상품으로 교환하거나 반품하고자 할 경우, 수령일로 부터 7일 이내이며 미개봉 제품인 경우에 한하여 조치해 드립니다.
    이에 소요되는 비용은 고객님 부담입니다. (제품 사용 후 변심에 의한 교환 및 환불은 불가)
    제품의 교환 및 반품 시에는 상품 비닐 및 박스(Brand Box)를 수령하신 상태 그대로 보존하고 있을 경우에만 가능합니다.
    교환 및 반품 택배 보내실 때 상품 박스(Brand Box)가 손상되지 않도록 반드시 외부에 박스 한 겹 더 포장 부탁드립니다.

    * 건전지가 포함된 제품의 경우 수입 및 유통 과정에서 건전지의 전압 저하 및 방전의 경우가 있을 수 있습니다. 이럴 경우 영업 담당자에게 연락 주시면 신속하게 처리해 드리도록 하겠습니다.

  • 교환 및 반품, 환불이 불가능 한 경우

    1. 이용자에게 책임이 있는 사유로 제품이 훼손된 경우
    2. 이용자의 사용 또는 일부 소비에 의하여 재화 등의 가치가 현저히 감소한 경우
    3. 제품의 포장(비닐 및 상품박스)을 훼손 한 경우
    4. 주문 당시 재고가 없어서 국내 / 해외 조달 분 중 수입 발주 되어진 상품
    * 재고 상품이 아닌 경우, 수입 발주 되어진 상품의 주문 취소도 불가

  • 환불 안내

    현금 결제의 경우 구매자의 이름(또는 회사명)으로 개설된 은행계좌로 송금되며, 카드 결제의 경우 카드 승인 취소로 조치 해 드립니다.

Quick Menu