본문 바로가기 주메뉴 바로가기

제품소개

home   제품소개 > >

Thermo Scientific HERAEUS BB 15 (HERAEUS BB 15)

Thermo Scientific HERAEUS BB 15

주요특징

  • Precise temperature and CO2 control for optimal growth conditions
  • Powerful humidification system for short recovery times
  • Solid copper interior for permanent contamination control (optional)

안내사항

   현재 홈페이지에 등록된 제품들은 재고 유무와 관계없이 구입이 가능하며, 별도문의의 상품인 경우 반드시 유선상 확인 후 구매부탁드립니다.
   납기가 표기된 상품의 경우 일반적인 수입진행에 소요되는 기간이며, 상품에 따라 납기일정이 추가 될 수 있으니 참고부탁드립니다.



Thermo Scientific HERAEUS BB 15

 

Description

Our Heraeus BB 15 Function Line CO2 incubator provides everything you need for the good growth of cell and tissue cultures.

 

Major Features
·
Precise temperature and CO2 control for optimal growth conditions
· Powerful humidification system for short recovery times
· Solid copper interior for permanent contamination control (optional)

Temperature Control
A precise Pt 1000 temperature sensor controls the air jacket heating for constant temperature. In case of failure, the system is equipped with a second circuit, taking over control to keep the temperature at the preset value.


CO2 Control
The CO2 concentration is measured with a highly reliable TCD sensor. The sensor is auto calibrated on every auto-start routine.


Humidification
For reducing the surface area, the water pan has been eliminated and the bottom of the chamber is used as a water reservoir. Therefore, a quicker evaporation rate has been achieved, through a greater water surface area and supported by the direct heat transfer from the bottom of the chamber.

 

Minimal Surface
The BB 15 chamber is consequently designed for a less contamination-prone surface area. It doesn’t have any air ducts and no duplicate side walls. The shelf system has been reduced to the absolute minimum. Even the water pan has been eliminated. Therefore, the BB 15 has up to 50% less surface than other incubators.


Easy to Clean
The chamber has a high quality electropolished finish resulting in a very smooth surface. All corners and edges are coved; there are no bolts or screws inside. All door gaskets can be easily removed and reinstalled, making cleaning easy

 

Easy to Use
The shelf system is easy to mount and take off. The shelves contain a travel stop to avoid tipping when dragged out too far. The back of the chamber is equipped with a 42mm (1.7 inch) access port to facilitate installation of appliances within the chamber. Large displays allow easy parameter control.

 

 


Solid Copper Interior (optional)
The BB 15 is available with a solid copper interior. The chamber, the shelving system, the fan and even the fan housing is made of solid copper. Solid copper has been proven to show good antimicrobial activity. In the humid atmosphere the copper surface will slightly oxidize and microbes settling down on this surface get inactivated by the released copper ions. And because copper oxide is not volatile, it will not affect any cells in vessels or flasks that are not in contact with the copper surface. This results in a very effective, permanent contamination control of the whole interior surface area.


Left: BB 15 Function Line CO2 incubator – ideal for cell and tissue culture.

Right: The BB 15 chamber is consequently designed for less contamination-prone surface area


 

Technical Data

Type Unit BB 15

Dimensions

 

 

External (w x h x d)

mm/ inch

637 x 867 x 766 / 25.1 x 34.1 x 30.2

Internal(w x h x d)

mm/ inch

470 x 607 x 530 / 18.5 x 23.9 x 20.9

Total volume

litres
cu.ft.

approx. 151
5.3

Temperature

air jacket temperature contro

 

Temperature control range

°C

TA +3 … 55

Temperature deviation, time1) / spatial1)

K

±0.1 / ± 0.5

Ambient temperature range

°C

+ 18 … 33

Recovery time at 37 °C2)

min

≤10

Humidity

 

 

Constant humidity

%RH

≥95

Recovery time at 95 % rH3)

min

≤30

CO2 Control

 

 

Measure and control range

Vol – %

0 … 20

Control accuracy

Vol – %

± 0.1

Recovery time, 5% CO2 2)

min

≤5

Weight (excl. accessories)

kg / Lbs

70 / 154


  • 배송 안내

    택배 배송을 기본으로 하며 고객님의 요청에 의해 화물로 배송이 가능합니다.
    고객님의 요청에 의한 긴급 배송(고속버스 화물, 퀵서비스 등)으로 인한 물류비용은 고객님의 부담입니다.
    제품 설치 및 교육이 필요한 경우는 Off-Line으로 본사 기술부와 미리 논의 하시고, 직납 일정등의 협의를 부탁드립니다.

  • 배송 기간

    재고가 있는 품목에 한하여 입금 확인 후 2일 이내에 발송 됩니다. (입금 확인은 당일 3시 마감되며, 3시 이후 입금 건은 익일 처리 됩니다.)
    택배의 경우 일반적으로 발송일로부터 3~7일, 도서/산간/오지 등 교통이 불편한 지역의 경우 4~8일(토.일, 공휴일 제외) 정도 소요됩니다.

    불가 항력의 사유(일시품절/제조사로부터의 제품 수급 문제/천재지변 등)로 배송이 지연 될 경우 고객님께 연락을 드리겠습니다.
    수입품목의 공급 및 재고 상태는 주문시점에 따라 달라질 수 있으며, 공급이 어려울 경우 주문접수 후 주문이 취소 될 수 있습니다.
    재고가 없는 상품의 경우 상품이 입고 된 이후 발송이 가능하므로, 안내 받으신 배송기간 보다 다소 연장될 수 있습니다.
    제품 준비 과정에 차질이 생겨 늦어질 경우에는 고객님께 연락을 드리겠습니다.
    주문하신 상품은 결제 확인 후 발송됩니다.
    결제 후 메일 [ scist@scist.co.kr ]이나 전화 [ 031-546-8799 ]으로 연락 주시면 더욱 빨리 처리 해 드리겠습니다.

  • 배송 지역

    전국 어느 지역이나 배송 가능합니다. (단, 지역에 따라서 배송기간에 다소 차이가 있을 수 있습니다.)

  • 배송 운임

    주문 금액 기준 (부가세 별도) 총액 10만원 이상 주문시에는 무료로 배송해 드립니다. (택배기준)
    단, 10만원 미만 주문 시 착불 발송되며, 요청에 따라 주문자 사전 결제로 선불 배송 가능합니다.
    택배 배송이 불가능한 상품(장비 류 등)이나, ‘운임비 별도’로 명시 된 상품, 고객요청에 의한 운동수단 이용 시 배송비는 주문자 부담으로 진행됨에 유의 해 주시기 바랍니다.

  • 배송 확인 방법

    마이페이지의 주문/배송조회 내역에서 확인 가능합니다.

  • 교환 및 반품 안내

    상품에 하자가 있거나 주문한 상품과 다를 경우, 수령일로부터 15일 이내인 경우에 한하여 1:1 상품교환 또는 전액 환불 조치 해드리며,
    이에 소요되는 모든 비용 또한 싸이스트(주)에서 부담합니다.
    제품에 하자는 없지만, 다른 상품으로 교환하거나 반품하고자 할 경우, 수령일로 부터 7일 이내이며 미개봉 제품인 경우에 한하여 조치해 드립니다.
    이에 소요되는 비용은 고객님 부담입니다. (제품 사용 후 변심에 의한 교환 및 환불은 불가)
    제품의 교환 및 반품 시에는 상품 비닐 및 박스(Brand Box)를 수령하신 상태 그대로 보존하고 있을 경우에만 가능합니다.
    교환 및 반품 택배 보내실 때 상품 박스(Brand Box)가 손상되지 않도록 반드시 외부에 박스 한 겹 더 포장 부탁드립니다.

    * 건전지가 포함된 제품의 경우 수입 및 유통 과정에서 건전지의 전압 저하 및 방전의 경우가 있을 수 있습니다. 이럴 경우 영업 담당자에게 연락 주시면 신속하게 처리해 드리도록 하겠습니다.

  • 교환 및 반품, 환불이 불가능 한 경우

    1. 이용자에게 책임이 있는 사유로 제품이 훼손된 경우
    2. 이용자의 사용 또는 일부 소비에 의하여 재화 등의 가치가 현저히 감소한 경우
    3. 제품의 포장(비닐 및 상품박스)을 훼손 한 경우
    4. 주문 당시 재고가 없어서 국내 / 해외 조달 분 중 수입 발주 되어진 상품
    * 재고 상품이 아닌 경우, 수입 발주 되어진 상품의 주문 취소도 불가

  • 환불 안내

    현금 결제의 경우 구매자의 이름(또는 회사명)으로 개설된 은행계좌로 송금되며, 카드 결제의 경우 카드 승인 취소로 조치 해 드립니다.

Quick Menu