|
듀얼 프로그램 |
· 2개 샘플 프로그램 연속 사용 가능
· 요일별 스케쥴링, 여러대의 샘플러와 같은 기능을 한대의
샘플러로 가능 |
샘플링 모드 |
· Pacing : Time Weighted, Flow Weighted,
Time Table, Flow Table, Event
· Distribution : Single bottle composite, multibottle
composite, multi-bottle discrete, bottles
per sample, samples per bottle or a combination
of bottles per sample and samples per bottle |
Run 모드 |
연속 또는 비연속적 |
상태 스크린 |
작동중인 프로그램 통신, 다음 샘플 채취 시간, 남은
샘플 수량, 채널 수, 최근 측정 시간, 메모리 가능여부,
가능한 채널수 , 알람 기능, 작동중인 센서와 온도 |
알람 |
시스템 진단 및 각 상태별 알람설정 기능 |
매뉴얼 샘플 |
독립적 샘플 채취 프로그램 |
Automatic
Shutdown |
· Multiple Bottle Mode : After complete revolution
of distributor arm (unless Continuous Mode is
selected)
· Composite Mode : After preset number of
samples have been delivered to composite
container, from 1 to 999 samples, or upon full
container. |
샘플 양 |
· 10ml 부터 10,000 ml 까지 가능
· 10ml 단위 프로그램 증가 가능 |
샘플 간 interval |
Selectable in single increments from 1 to 9,999
flow pulses (momentary contact closure 25 ms or
5 to 12 Vdc pulse; 4-20 mA interface optional),
or 1 to 9,999 minutes in one minute increments |
Set point 샘플
Trigger |
When equipped with flow sensor or pH/temperature
sensor or peripheral monitoring options, sampling
can be triggered upon an upset condition when field
selectable limits are exceeded |
데이터 저장 Trigger |
SAMPLE HISTORYStores up to 4000 entries for
sample time stamp, bottle number and sample
status (success, bottle full, rinse error, user
abort, distributor error, pump fault, purge fail,
sample timeout, power fail and low main battery)
MEASUREMENTSStores up to 325,000 entries for
selected measurement channels in accordance
with the selected logging interval
이벤트 저장 :
Stores up to 2000 entries. Records Power On,
Power Fail, Firmware Updated, Pump Fault,
Distributor Arm Error, Low Memory Battery, Low
Main Battery, User On, User Off, Program
Started, Program Resumed, Program Halted,
Program Completed, Grab Sample, Tube Change
Required, sensor communication errors, cooling
failed, heating failed, thermal error corrected
View event and alarm logs as well as
maintenance iagnosticspH/temperature sensor
or peripheral monitoring options, sampling can
be triggered upon an upset condition when field
selectable limits are exceeded |
진단 |
View event and alarm logs as well as
maintenance diagnostics |
Sampler Housing |
Impact resistant ABS plastic, 3-section
construction Double-walled base with 1 in.
(2.54 cm) insulation, direct ice contact with
bottles |
사용 온도조건 |
· 작동시 : 0 to 49 °C
· 보관시 : -40 to 60°C |
전원 사양 |
12 Vdc supplied by optional a/c power converter
or battery. Average current with pump running:
2.25 amps dc |
AC Power Backup
(Pump Controller Only) |
Rechargeable 6 amp-hour gel lead acid battery
takes over automatically with AC line power
failure. Integral trickle charger maintains battery
as full charge (factory installed option) |
태양광 판넬/백업 |
12 Vdc regulated supply voltage
5 watts minimum; optional 12 Vdc lead-acid or
gel-electrolyte battery backup |
제품 크기 |
· Standard Base: 50.5 cm x 69.4 cm
· Compact Base: 44.1 x 61 cm
· Composite Base: 50.28 x 79.75 cm |
제품 무게 |
· Standard: 15 kg (35.6 lb.) with
(24) 1-L polyethylene bottles; 14.8 kg (32.6 lb.)
with 10 L (2.5gal) polyethylene bottle
· Compact Base: 12.2 kg (27 lb.) with
(24) 575-mL polyethylene bottles;
12.9 kg (28.3 lb.) with 10 L (2.5-gal)
polyethylene bottle
· Composite Base: 15 kg (36 lb.) with
(1) 21 L (5.5 gal) polyethylene bottle |
